Home   >  Specs   >   Trial   >  Beta REV-3 200

2008 Beta REV-3 200 Specs

General İnformation

Model Beta REV-3 200
Year 2008
Category Trial

Engine and transmission

Displacement 195.00 ccm (11.90 cubic inches)
Compression 11.8:1
Bore x stroke 64.0 x 64.0 mm (2.5 x 2.5 inches)
Fuel system Carburettor. Keihin PWK ø 28mm
Ignition Electronic AET 12V - 85W
Lubrication system mix with fuel 1,5 % (synthetic oil)
Cooling system Liquid
Gearbox 6-speed

Chassis, suspension, brakes and wheels

Frame type Double wave aluminium beam
Front suspension Hydraulic fork with ø38 mm shaft
Rear suspension Hydraulic monoshock
Frame 2.75-21
Front tyre 2.75-21
Rear tyre 42843
Front brakes Single disc. 4 piston caliper
Front brakes diamete 185 mm (7.3 inches)
Rear brakes Single disc. 2 piston caliper
rear_brakes_diameter 165 mm (6.5 inches)

Physical measures and capacities

Dry weight 70.0 kg (154.3 pounds)
Seat height 660 mm (26.0 inches) If adjustable, lowest setting.
Overall height 1,120 mm (44.1 inches)
Overall length 1,990 mm (78.3 inches)
Overall width 850 mm (33.5 inches)
Ground clearance 310 mm (12.2 inches)
Wheelbase 1,310 mm (51.6 inches)
Fuel capacity 3.00 litres (0.79 gallons)
Reserve fuel capacity 0.80 litres (0.21 gallons)

Other specifications

Modifications compared to previous model Technical Modifications 2008 New crankcase. New design in the area of the connection between barrel and crankcase has reduced crank chamber volume with a nett increase in smoothness at low revs. New main bearings: these ensure greater smoothness and reliability. New crankshaft oilseal: the reduction in friction has given the engine a cleaner response to the throttle. New colour-scheme: a brand-new mix of white and fluorescent red.
Best Videos

Featured Motorcycle Manufacturers