USA Motorcycles

Home   >  Specs   >   Enduro - Offroad   >  BMW HP2 Enduro

2008 BMW HP2 Enduro Specs

General İnformation

Model BMW HP2 Enduro
Year 2008
Category Enduro - Offroad

Engine and transmission

Displacement 1170.00 ccm (71.39 cubic inches)
Power 103.25 HP (75.4 kW)) @ 7000 RPM
Torque 115.00 Nm (11.7 kgf-m or 84.8 ft.lbs) @ 5500 RPM
Compression 11.0:1
Bore x stroke 101.0 x 73.0 mm (4.0 x 2.9 inches)
Valves per cylinder 4
Fuel system Injection. Electronic intake pipe injection/BMS-K digital engine management with overrun fuel cut-off, twin-spark ignition
Fuel control Single Overhead Cams (SOHC)
Cooling system Oil & air
Gearbox 6-speed
Transmission type, final drive Shaft drive (cardan)
Fuel consumption 4.10 litres/100 km (24.4 km/l or 57.37 mpg)
Greenhouse gases 95.1 CO2 g/km. (CO2 - Carbon dioxide emission)

Chassis, suspension, brakes and wheels

Frame type Tubular steel space frame
Rake (fork angle) 32.5°
Trail 157 mm (6.2 inches)
Front suspension WAD upside-down front fork, Ø 45 mm, compression damping continuously adjustable in two ranges, rebound damping adjustable
Front wheel travel 270 mm (10.6 inches)
Rear suspension Forged aluminium single-sided swinging arm with BMW Motorrad Paralever
Rear wheel travel 250 mm (9.8 inches)
Frame 90/90-21
Front tyre 90/90-21
Rear tyre 140/80-17
Front brakes Single disc
Front brakes diamete 305 mm (12.0 inches)
Rear brakes Single disc
rear_brakes_diameter 265 mm (10.4 inches)

Physical measures and capacities

Dry weight 175.0 kg (385.8 pounds)
Weight incl. oil, gas, etc 195.0 kg (429.9 pounds)
Power/weight ratio 0.5900 HP/kg
Seat height 920 mm (36.2 inches) If adjustable, lowest setting.
Overall length 2,350 mm (92.5 inches)
Overall width 22,352 mm (880.0 inches)
Wheelbase 1,625 mm (64.0 inches)
Fuel capacity 13.00 litres (3.43 gallons)

Other specifications

Best Videos

Featured Motorcycle Manufacturers